How to factory reset Arris SBG6400 router – Default Login & Password

The Arris SBG6400 router has 300mbps WiFi, 2 Gigabit ETH-ports and 0 USB-ports.
How to factory reset Arris SBG6400 - Default Login & Password

Arris SBG6400 default Password , Login & Gateway settings :

If you have performed a reset of your SBG6400 device or not changed the defaults, you
should
be able to access it with the following settings
Default subnet mask: 255.255.255.0

How to factory reset (hard reset) Arris SBG6400 :

You can factory reset your Arris SBG6400 in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds

Arris SBG6400 router specifications :

System specs
CPU: n/a
RAM: 256 MiB
Flash: 32 MiB
Custom firmwares: None
Connectivity
WiFi: 300mbps (bgn)
WiFi bands
2.4GHz
WiFi throughput: n/a
WAN
None
ETH
2 x Gigabit ports
USB-ports: 0
SBG6400 Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Arris SBG6400
Arris stock firmware for the SBG6400
Stock firmwares for the SBG6400 are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.