The Belkin BoB (F1PI243EGau, iinet) router has 300mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports.
Belkin BoB (F1PI243EGau, iinet) default Password , Login & Gateway settings :
Default Gateway IP: 10.1.1.1
Default password: admin
Default subnet mask: 255.255.255.0
Default DNS server: 10.1.1.1
How to factory reset (hard reset) Belkin BoB (F1PI243EGau, iinet) :
You can factory reset your Belkin BoB (F1PI243EGau, iinet) in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
Belkin BoB (F1PI243EGau, iinet) router specifications :
System specs
CPU: 300 MHz
RAM: 32 MiB
Flash: 8 MiB
Custom firmwares: None
Connectivity
WiFi: 300mbps (bgn)
WiFi bands
n/a
WiFi throughput: n/a
WAN
None
ETH
4 x 100mbps ports
USB-ports: 0
BoB (F1PI243EGau, iinet) Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Belkin BoB (F1PI243EGau, iinet)
Belkin stock firmware for the BoB (F1PI243EGau, iinet)
Stock firmwares for the BoB (F1PI243EGau, iinet) are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.
