The Belkin F5D8232-4 v1 router has 300mbps WiFi, 4 Gigabit ETH-ports and 0 USB-ports.
Belkin F5D8232-4 v1 default Password , Login & Gateway settings :
Default Gateway IP: 192.168.2.1
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.2.1
How to factory reset (hard reset) Belkin F5D8232-4 v1 :
You can factory reset your Belkin F5D8232-4 v1 in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
Belkin F5D8232-4 v1 router specifications :
RAM: 16 MiB
Flash: 8 MiB
Custom firmwares: None
WiFi: 300mbps (bgn)
WiFi throughput: n/a
1 x Gigabit port
4 x Gigabit ports
F5D8232-4 v1 Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Belkin F5D8232-4 v1
Belkin stock firmware for the F5D8232-4 v1
Stock firmwares for the F5D8232-4 v1 are available under the download section on the
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.