How to factory reset Belkin F5D8235-4 v2 (v21xx) router – Default Login & Password

The Belkin F5D8235-4 v2 (v21xx) router has 300mbps WiFi, 4 Gigabit ETH-ports and 0 USB-ports.
It is also known as the Belkin N+ Wireless Router.
How to factory reset Belkin F5D8235-4 v2 (v21xx) - Default Login & Password

Belkin F5D8235-4 v2 (v21xx) default Password , Login & Gateway settings :

Default Gateway IP: 192.168.2.1
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.2.1

How to factory reset (hard reset) Belkin F5D8235-4 v2 (v21xx) :

You can factory reset your Belkin F5D8235-4 v2 (v21xx) in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds

Belkin F5D8235-4 v2 (v21xx) router specifications :

System specs
CPU: 384 MHz
RAM: 32 MiB
Flash: 8 MiB
Custom firmwares: None
Connectivity
WiFi: 300mbps (bgn)
WiFi bands
2.4GHz
WiFi throughput: n/a
WAN
1 x Gigabit port
ETH
4 x Gigabit ports
USB-ports: 0
F5D8235-4 v2 (v21xx) Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Belkin F5D8235-4 v2 (v21xx)
Belkin stock firmware for the F5D8235-4 v2 (v21xx)
Stock firmwares for the F5D8235-4 v2 (v21xx) are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.

Belkin