The Belkin F7D2301 router has 300mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports.
It is also known as the Belkin Surf Wireless Router.
Belkin F7D2301 default Password , Login & Gateway settings :
Default Gateway IP: 192.168.2.1
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.2.1
How to factory reset (hard reset) Belkin F7D2301 :
You can factory reset your Belkin F7D2301 in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
Belkin F7D2301 router specifications :
CPU: 384 MHz
RAM: 8 MiB
Flash: 2 MiB
Custom firmwares: None
WiFi: 300mbps (bgn)
WiFi throughput: n/a
1 x 100mbps port
4 x 100mbps ports
Belkin F7D2301 review (quick overview)
Here is the quick comparison of how the Belkin F7D2301 compares to
other routers on our site
For a full list of routers and how they compare to the F7D2301, check the
Router Buying Guide which will help you buy the most
Staying up to date with the latest firmware is a good idea to keep your router even more
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Belkin F7D2301
Belkin stock firmware for the F7D2301
Stock firmwares for the F7D2301 are available under the download section on the
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.