The Belkin F9K1113 v4 router has Gigabit WiFi, 4 Gigabit ETH-ports and 0 USB-ports.
It is also known as the Belkin AC1200 DB Wi-Fi Dual-Band AC+ Gigabit Router.
Belkin F9K1113 v4 default Password , Login & Gateway settings :
Default Gateway IP: 192.168.2.1
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.2.1
How to factory reset (hard reset) Belkin F9K1113 v4 :
You can factory reset your Belkin F9K1113 v4 in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
Belkin F9K1113 v4 router specifications :
RAM: 64 MiB
Custom firmwares: None
WiFi: Gigabit (abgn+ac)
2.4GHz & 5GHz
WiFi throughput: n/a
1 x Gigabit port
4 x Gigabit ports
Belkin F9K1113 review (quick overview)
Here is the quick comparison of how the Belkin F9K1113 compares to
other routers on our site
For a full list of routers and how they compare to the F9K1113 v4, check the
Router Buying Guide which will help you buy the most
F9K1113 v4 Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Belkin F9K1113 v4
Belkin stock firmware for the F9K1113 v4
Stock firmwares for the F9K1113 v4 are available under the download section on the
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.