How to factory reset BT Dual-Band Wi-Fi Extender AC 1200 router – Default Login & Password

The BT Dual-Band Wi-Fi Extender AC 1200 router has Gigabit WiFi, N/A ETH-ports and 0 USB-ports.

BT Dual-Band Wi-Fi Extender AC 1200 default Password , Login & Gateway settings :

Default Gateway IP: 192.168.1.1
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.1

How to factory reset (hard reset) BT Dual-Band Wi-Fi Extender AC 1200 :

You can factory reset your BT Dual-Band Wi-Fi Extender AC 1200 in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds

BT Dual-Band Wi-Fi Extender AC 1200 router specifications :

System specs
CPU: 580 MHz
RAM: 64 MiB
Flash: 8 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
n/a
WiFi throughput: n/a
WAN
None
ETH
None
USB-ports: 0
Dual-Band Wi-Fi Extender AC 1200 Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the BT Dual-Band Wi-Fi Extender AC 1200
BT stock firmware for the Dual-Band Wi-Fi Extender AC 1200
Stock firmwares for the Dual-Band Wi-Fi Extender AC 1200 are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.