How to factory reset Buffalo LPV4-U2-300S router – Default Login & Password

The Buffalo LPV4-U2-300S router has 300mbps WiFi, 1 100mbps ETH-ports and 0 USB-ports.
How to factory reset Buffalo LPV4-U2-300S - Default Login & Password

Buffalo LPV4-U2-300S default Password , Login & Gateway settings :

Default Gateway IP: acquired via DHCP
Default username: admin
Default password: password
Default subnet mask: 255.255.255.0
Default DNS server: acquired via DHCP

How to factory reset (hard reset) Buffalo LPV4-U2-300S :

You can factory reset your Buffalo LPV4-U2-300S in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds

Buffalo LPV4-U2-300S router specifications :

System specs
CPU: 300 MHz
RAM: 32 MiB
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: 300mbps (bgn)
WiFi bands
2.4GHz
WiFi throughput: n/a
WAN
None
ETH
1 x 100mbps port
USB-ports: 0

Buffalo