The Buffalo WAPS-APG600H router has 300mbps WiFi, 2 Gigabit ETH-ports and 0 USB-ports.
Buffalo WAPS-APG600H default Password , Login & Gateway settings :
If you have performed a reset of your WAPS-APG600H device or not changed the defaults, you
should
be able to access it with the following settings
Default Network name (SSID): BUFFALO-XXXXXX_A,BUFFALO-XXXXXX_G
Default username: admin
Default password: password
Default subnet mask: 255.255.255.0
How to factory reset (hard reset) Buffalo WAPS-APG600H :
You can factory reset your Buffalo WAPS-APG600H in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
Buffalo WAPS-APG600H router specifications :
System specs
CPU: n/a
RAM: 128 MiB
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: 300mbps (abgn)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
None
ETH
2 x Gigabit ports
USB-ports: 0
