The Cisco RV340W router has Gigabit WiFi, 4 Gigabit ETH-ports and 0 USB-ports.
It is also known as the Cisco Dual WAN Gigabit Wireless-AC VPN Router.
The RV340W is featured in our
Best Mid-end routers: buying guide
Cisco RV340W default Password , Login & Gateway settings :
Default Gateway IP: 192.168.1.1
Default username: cisco
Default password: cisco
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.1
How to factory reset (hard reset) Cisco RV340W :
You can factory reset your Cisco RV340W in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
Cisco RV340W router specifications :
CPU: 1.2 GHz
RAM: 1024 MiB
Flash: 256 MiB + 4 MiB
Custom firmwares: None
WiFi: Gigabit (abgn+ac)
2.4GHz & 5GHz
WiFi throughput: n/a
2 x Gigabit ports
4 x Gigabit ports
Cisco RV340W review (quick overview)
Here is the quick comparison of how the Cisco RV340W compares to
other routers on our site
For a full list of routers and how they compare to the RV340W, check the
Router Buying Guide which will help you buy the most
Staying up to date with the latest firmware is a good idea to keep your router even more
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Cisco RV340W
Cisco stock firmware for the RV340W
Stock firmwares for the RV340W are available under the download section on the
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.