How to factory reset Cisco WAP200 router – Default Login & Password

The Cisco WAP200 router has 54mbps WiFi, 1 100mbps ETH-ports and 0 USB-ports.
How to factory reset Cisco WAP200 - Default Login & Password

Cisco WAP200 default Password , Login & Gateway settings :

Default Gateway IP: 192.168.1.245
Default username: admin
Default password: admin
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.245

How to factory reset (hard reset) Cisco WAP200 :

You can factory reset your Cisco WAP200 in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds

Cisco WAP200 router specifications :

System specs
CPU: n/a
RAM: n/a
Flash: 4 MiB
Custom firmwares: None
Connectivity
WiFi: 54mbps (bg)
WiFi bands
2.4GHz
WiFi throughput: n/a
WAN
None
ETH
1 x 100mbps port
USB-ports: 0