How to factory reset D-Link DAP-1610 rev A1 router – Default Login & Password

The D-Link DAP-1610 rev A1 router has Gigabit WiFi, 1 100mbps ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 1200 Mpbs.
It is also known as the D-Link AC1200 WiFi Range Extender.
How to factory reset D-Link DAP-1610 rev A1 - Default Login & Password

D-Link DAP-1610 rev A1 default Password , Login & Gateway settings :

Default Gateway IP: 192.168.0.50
D-Link login instructions
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.50

How to factory reset (hard reset) D-Link DAP-1610 rev A1 :

You can factory reset your D-Link DAP-1610 rev A1 in the following way(s)
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface

D-Link DAP-1610 rev A1 router specifications :

System specs
CPU: n/a
RAM: 64 MiB
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: 1200 Mpbs
WAN
None
ETH
1 x 100mbps port
USB-ports: 0
D-Link DAP-1610 review (quick overview)
Here is the quick comparison of how the D-Link DAP-1610 compares to
other routers on our site
Average
34/100
Editor
76/100
WiFi
24/100
Hardware
3/100
Current price
$15.99
For a full list of routers and how they compare to the DAP-1610 rev A1, check the
Router Buying Guide which will help you buy the most
price-competitive router.