The D-Link DAP-2662 rev A1 router has Gigabit WiFi, ETH-ports and 0 USB-ports.
D-Link DAP-2662 rev A1 default Password , Login & Gateway settings :
Default Gateway IP: 192.168.0.50
D-Link login instructions
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.50
How to factory reset (hard reset) D-Link DAP-2662 rev A1 :
You can factory reset your D-Link DAP-2662 rev A1 in the following way(s)
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface
D-Link DAP-2662 rev A1 router specifications :
System specs
CPU: 750 MHz
RAM: n/a
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
None
ETH
None
USB-ports: 0
