How to factory reset D-Link DGL-4300 rev A2 router – Default Login & Password

The D-Link DGL-4300 rev A2 router has 54mbps WiFi, 4 Gigabit ETH-ports and 0 USB-ports.
It is also known as the D-Link Wireless 108G Gaming Router.
How to factory reset D-Link DGL-4300 rev A2 - Default Login & Password

D-Link DGL-4300 rev A2 default Password , Login & Gateway settings :

Default Gateway IP: 192.168.0.1
D-Link login instructions
Default username: Admin
D-Link router default password list
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.1

How to factory reset (hard reset) D-Link DGL-4300 rev A2 :

You can factory reset your D-Link DGL-4300 rev A2 in the following way(s)
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface

D-Link DGL-4300 rev A2 router specifications :

System specs
CPU: n/a
RAM: 16 MiB
Flash: 4 MiB
Custom firmwares: None
Connectivity
WiFi: 54mbps (bg)
WiFi bands
2.4GHz
WiFi throughput: n/a
WAN
1 x Gigabit port
ETH
4 x Gigabit ports
USB-ports: 0
D-Link DGL-4300 review (quick overview)
Here is the quick comparison of how the D-Link DGL-4300 compares to
other routers on our site
Average
23/100
Editor
66/100
WiFi
2/100
Hardware
1/100
Current price
$44.99
For a full list of routers and how they compare to the DGL-4300 rev A2, check the
Router Buying Guide which will help you buy the most
price-competitive router.
DGL-4300 rev A2 Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the D-Link DGL-4300 rev A2
D-Link stock firmware for the DGL-4300 rev A2
Stock firmwares for the DGL-4300 rev A2 are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.