The D-Link DGL-4500 rev A2 router has 300mbps WiFi, 4 Gigabit ETH-ports and 0 USB-ports.
D-Link DGL-4500 rev A2 default Password , Login & Gateway settings :
Default Gateway IP: 192.168.0.1
D-Link login instructions
Default username: admin
D-Link router default password list
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.1
How to factory reset (hard reset) D-Link DGL-4500 rev A2 :
You can factory reset your D-Link DGL-4500 rev A2 in the following way(s)
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface
How to login to the D-Link DGL-4500 rev A2 :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
You should be prompted with a login dialogue.
Enter the username: admin
and if it requires a password, leave it empty or try with admin / password
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.
D-Link DGL-4500 rev A2 router specifications :
Custom firmwares: None
WiFi: 300mbps (abgn)
2.4GHz & 5GHz
WiFi throughput: n/a
1 x Gigabit port
4 x Gigabit ports
D-Link DGL-4500 review (quick overview)
Here is the quick comparison of how the D-Link DGL-4500 compares to
other routers on our site
For a full list of routers and how they compare to the DGL-4500 rev A2, check the
Router Buying Guide which will help you buy the most
DGL-4500 rev A2 Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the D-Link DGL-4500 rev A2
D-Link stock firmware for the DGL-4500 rev A2
Stock firmwares for the DGL-4500 rev A2 are available under the download section on the
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.