The D-Link DI-604 rev F4 router has No WiFi, 4 100mbps ETH-ports and 0 USB-ports.
D-Link DI-604 rev F4 default Password , Login & Gateway settings :
Default Gateway IP: 192.168.0.1
D-Link login instructions
Default username: admin
D-Link router default password list
Default password: blank
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.1
How to factory reset (hard reset) D-Link DI-604 rev F4 :
You can factory reset your D-Link DI-604 rev F4 in the following way(s)
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface
How to login to the D-Link DI-604 rev F4 :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
You should be prompted with a login dialogue.
Enter the username: admin
and the password blank
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.
D-Link DI-604 rev F4 router specifications :
CPU: 100 MHz
RAM: 2 MiB
Flash: 0.5 MiB
Custom firmwares: None
WiFi: No ()
WiFi throughput: n/a
1 x 100mbps port
4 x 100mbps ports