How to factory reset D-Link DI-713 router – Default Login & Password

The D-Link DI-713 router has 11mbps WiFi, 3 100mbps ETH-ports and 0 USB-ports.
It is also known as the D-Link Wireless Gateway & Access Point plus Switch.

D-Link DI-713 default Password , Login & Gateway settings :

Default Gateway IP: 192.168.0.1
D-Link login instructions
Default password: admin
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.1

How to factory reset (hard reset) D-Link DI-713 :

You can factory reset your D-Link DI-713 in the following way(s)
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface

D-Link DI-713 router specifications :

System specs
CPU: n/a
RAM: n/a
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: 11mbps (b)
WiFi bands
n/a
WiFi throughput: n/a
WAN
1 x 100mbps port
ETH
3 x 100mbps ports
USB-ports: 0
DI-713 Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the D-Link DI-713
D-Link stock firmware for the DI-713
Stock firmwares for the DI-713 are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.