The D-Link DIR-320 rev A2 router has 54mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports.
Default Gateway IP: 192.168.0.1
D-Link login instructions
Default username: admin
D-Link router default password list
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.1
You can factory reset your D-Link DIR-320 rev A2 in the following way(s)
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
http://192.168.0.1
You should be prompted with a login dialogue.
Enter the username: admin
and if it requires a password, leave it empty or try with admin / password
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.
System specs
CPU: 240 MHz
RAM: 32 MiB
Flash: 4 MiB
Custom firmwares: OpenWrt
Connectivity
WiFi: 54mbps (bg)
WiFi bands
2.4GHz
WiFi throughput: n/a
WAN
1 x 100mbps port
ETH
4 x 100mbps ports
USB-ports: 0
The Ruckus Wireless ZoneFlex 7762-S router has 300mbps WiFi, 2 Gigabit ETH-ports and 0 USB-ports.ZoneFlex…
The Samsung SCH-LC11 (Verizon) router has 54mbps WiFi, N/A ETH-ports and 0 USB-ports.Samsung SCH-LC11 (Verizon)…
The SAPIDO RB-1232 router has 300mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports.It is also…
The SFR Neufbox 6 router has 300mbps WiFi, 4 Gigabit ETH-ports and 0 USB-ports.SFR Neufbox…
The Sitecom WL-309 router has 300mbps WiFi, 4 Gigabit ETH-ports and 0 USB-ports.It is also…
The SkyLink SL-R7205 (XDX-RN502J) router has 300mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports.SkyLink SL-R7205…