The D-Link DIR-836L rev A1 router has 300mbps WiFi, 4 Gigabit ETH-ports and 0 USB-ports.
It is also known as the D-Link Wireless N750 Dual Band Gigabit Cloud Router Cloud Router 2500.
D-Link DIR-836L rev A1 default Password , Login & Gateway settings :
Default Gateway IP: 192.168.0.1
D-Link login instructions
Default username: Admin
D-Link router default password list
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.1
How to factory reset (hard reset) D-Link DIR-836L rev A1 :
You can factory reset your D-Link DIR-836L rev A1 in the following way(s)
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface
How to login to the D-Link DIR-836L rev A1 :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
You should be prompted with a login dialogue.
Enter the username: Admin
and if it requires a password, leave it empty or try with admin / password
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.
D-Link DIR-836L rev A1 router specifications :
RAM: 128 MiB
Flash: 16 MiB
Custom firmwares: None
WiFi: 300mbps (abgn)
2.4GHz & 5GHz
WiFi throughput: n/a
1 x Gigabit port
4 x Gigabit ports
D-Link DIR-836L review (quick overview)
Here is the quick comparison of how the D-Link DIR-836L compares to
other routers on our site
For a full list of routers and how they compare to the DIR-836L rev A1, check the
Router Buying Guide which will help you buy the most