How to factory reset D-Link DIR-882 rev A1 router – Default Login & Password

The D-Link DIR-882 rev A1 router has Gigabit WiFi, 4 Gigabit ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 2600 Mpbs.
It is also known as the D-Link AC2600 MU-MIMO Wi-Fi Router.
The DIR-882 rev A1 is featured in our
Best Low-end routers: buying guide

D-Link DIR-882 rev A1 default Password , Login & Gateway settings :

If you have performed a reset of your DIR-882 rev A1 device or not changed the defaults, you
should
be able to access it with the following settings
Default Network name (SSID): dlink-XXXX
Default username: Admin
D-Link router default password list
Default subnet mask: 255.255.255.0

How to factory reset (hard reset) D-Link DIR-882 rev A1 :

You can factory reset your D-Link DIR-882 rev A1 in the following way(s)
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface

D-Link DIR-882 rev A1 router specifications :

System specs
CPU: 880 MHz
RAM: 128 MiB
Flash: 16 MiB
Custom firmwares: OpenWrt
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: 2600 Mpbs
WAN
1 x Gigabit port
ETH
4 x Gigabit ports
USB-ports: 0
D-Link DIR-882 review (quick overview)
Here is the quick comparison of how the D-Link DIR-882 compares to
other routers on our site
Average
49/100
Editor
76/100
WiFi
52/100
Hardware
21/100
Current price
$48.94
For a full list of routers and how they compare to the DIR-882 rev A1, check the
Router Buying Guide which will help you buy the most
price-competitive router.