How to factory reset D-Link DP-311U router – Default Login & Password

The D-Link DP-311U router has 11mbps WiFi, 1 100mbps ETH-ports and 0 USB-ports.
How to factory reset D-Link DP-311U - Default Login & Password

D-Link DP-311U default Password , Login & Gateway settings :

Default Gateway IP: 192.168.0.10
D-Link login instructions
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.10

How to factory reset (hard reset) D-Link DP-311U :

You can factory reset your D-Link DP-311U in the following way(s)
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface

D-Link DP-311U router specifications :

System specs
CPU: n/a
RAM: 2 MiB
Flash: 0.5 MiB
Custom firmwares: None
Connectivity
WiFi: 11mbps (b)
WiFi bands
2.4GHz
WiFi throughput: n/a
WAN
None
ETH
1 x 100mbps port
USB-ports: 0
DP-311U Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the D-Link DP-311U
D-Link stock firmware for the DP-311U
Stock firmwares for the DP-311U are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.