How to factory reset D-Link DSR-250N router – Default Login & Password

The D-Link DSR-250N router has 300mbps WiFi, 8 Gigabit ETH-ports and 0 USB-ports.
How to factory reset D-Link DSR-250N - Default Login & Password

D-Link DSR-250N default Password , Login & Gateway settings :

Default Gateway IP:
D-Link login instructions
Default username: admin
D-Link router default password list
Default password: admin
Default subnet mask:
Default DNS server:

How to factory reset (hard reset) D-Link DSR-250N :

You can factory reset your D-Link DSR-250N in the following way(s)
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface

How to login to the D-Link DSR-250N :

Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
You should be prompted with a login dialogue.
Enter the username: admin
and the password admin
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.

D-Link DSR-250N router specifications :

System specs
CPU: 300 MHz
RAM: 128 MiB
Flash: 32 MiB
Custom firmwares: None
WiFi: 300mbps (bgn)
WiFi bands
WiFi throughput: n/a
1 x Gigabit port
8 x Gigabit ports
USB-ports: 0
D-Link DSR-250N review (quick overview)
Here is the quick comparison of how the D-Link DSR-250N compares to
other routers on our site
Current price
For a full list of routers and how they compare to the DSR-250N, check the
Router Buying Guide which will help you buy the most
price-competitive router.