How to factory reset D-Link DWL-810 router – Default Login & Password

The D-Link DWL-810 router has 11mbps WiFi, 1 10mbps ETH-ports and 0 USB-ports.
How to factory reset D-Link DWL-810 - Default Login & Password

D-Link DWL-810 default Password , Login & Gateway settings :

Default Gateway IP: 192.168.0.30
D-Link login instructions
Default username: admin
D-Link router default password list
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.30

How to factory reset (hard reset) D-Link DWL-810 :

You can factory reset your D-Link DWL-810 in the following way(s)
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface

How to login to the D-Link DWL-810 :

Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
http://192.168.0.30
You should be prompted with a login dialogue.
Enter the username: admin
and if it requires a password, leave it empty or try with admin / password
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.

D-Link DWL-810 router specifications :

System specs
CPU: n/a
RAM: n/a
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: 11mbps (b)
WiFi bands
2.4GHz
WiFi throughput: n/a
WAN
None
ETH
1 x 10mbps port
USB-ports: 0