How to factory reset D-Link DWL-8620APE rev A1 router – Default Login & Password

The D-Link DWL-8620APE rev A1 router has Gigabit WiFi, 2 N/A ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 2600 Mpbs.
It is also known as the D-Link Wireless AC2600 Wave2 4×4 MU-MIMO Dual Band Unified Access Point.
How to factory reset D-Link DWL-8620APE rev A1 - Default Login & Password

D-Link DWL-8620APE rev A1 default Password , Login & Gateway settings :

Default Gateway IP: 10.90.90.91
D-Link login instructions
Default username: admin
D-Link router default password list
Default password: admin
Default subnet mask: 255.255.255.0
Default DNS server: 10.90.90.91

How to factory reset (hard reset) D-Link DWL-8620APE rev A1 :

You can factory reset your D-Link DWL-8620APE rev A1 in the following way(s)
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface

How to login to the D-Link DWL-8620APE rev A1 :

Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
http://10.90.90.91
You should be prompted with a login dialogue.
Enter the username: admin
and the password admin
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.

D-Link DWL-8620APE rev A1 router specifications :

System specs
CPU: 1.4 GHz
RAM: 512 MiB
Flash: 128 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: 2600 Mpbs
WAN
None
ETH
2 x N/A ports
USB-ports: 0

D-Link