How to factory reset D-Link EBR-2310 rev A1 router – Default Login & Password

The D-Link EBR-2310 rev A1 router has No WiFi, 4 100mbps ETH-ports and 0 USB-ports.

D-Link EBR-2310 rev A1 default Password , Login & Gateway settings :

Default Gateway IP: 192.168.0.1
D-Link login instructions
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.1

How to factory reset (hard reset) D-Link EBR-2310 rev A1 :

You can factory reset your D-Link EBR-2310 rev A1 in the following way(s)
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface

D-Link EBR-2310 rev A1 router specifications :

System specs
CPU: n/a
RAM: 8 MiB
Flash: 1 MiB
Custom firmwares: None
Connectivity
WiFi: No ()
WiFi bands
n/a
WiFi throughput: n/a
WAN
1 x 100mbps port
ETH
4 x 100mbps ports
USB-ports: 0
D-Link EBR-2310 review (quick overview)
Here is the quick comparison of how the D-Link EBR-2310 compares to
other routers on our site
Average
25/100
Editor
72/100
WiFi
2/100
Hardware
1/100
Current price
$7.95
For a full list of routers and how they compare to the EBR-2310 rev A1, check the
Router Buying Guide which will help you buy the most
price-competitive router.