The D-Link WBR-2310 rev A1 router has 54mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports.
D-Link WBR-2310 rev A1 default Password , Login & Gateway settings :
Default Gateway IP: 192.168.0.1
D-Link login instructions
Default username: admin
D-Link router default password list
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.1
How to factory reset (hard reset) D-Link WBR-2310 rev A1 :
You can factory reset your D-Link WBR-2310 rev A1 in the following way(s)
With the reset button
Locate the reset button on the back off the router
While the unit is powered on, press the reset button with a sharp object (e.g. paperclip)
Hold the button pressed for 10 seconds, then release.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done.
You can now setup your router again through the user interface
How to login to the D-Link WBR-2310 rev A1 :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
You should be prompted with a login dialogue.
Enter the username: admin
and if it requires a password, leave it empty or try with admin / password
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.
D-Link WBR-2310 rev A1 router specifications :
RAM: 8 MiB
Flash: 2 MiB
Custom firmwares: None
WiFi: 54mbps (bg)
WiFi throughput: n/a
1 x 100mbps port
4 x 100mbps ports
D-Link WBR-2310 review (quick overview)
Here is the quick comparison of how the D-Link WBR-2310 compares to
other routers on our site
For a full list of routers and how they compare to the WBR-2310 rev A1, check the
Router Buying Guide which will help you buy the most