The EDUP EP-2655 router has Gigabit WiFi, 4 100mbps ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 1200 Mpbs.
EDUP EP-2655 default Password , Login & Gateway settings :
Default Gateway IP: 192.168.0.1
Default password: admin
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.1
How to factory reset (hard reset) EDUP EP-2655 :
You can factory reset your EDUP EP-2655 in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
EDUP EP-2655 router specifications :
System specs
CPU: 580 MHz
RAM: n/a
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz
WiFi throughput: 1200 Mpbs
WAN
1 x 100mbps port
ETH
4 x 100mbps ports
USB-ports: 0
EP-2655 Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the EDUP EP-2655
EDUP stock firmware for the EP-2655
Stock firmwares for the EP-2655 are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.
