The Encore ENHWI-1AN42 router has 300mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports.
It is also known as the Encore Wireless N150 Router.
Encore ENHWI-1AN42 default Password , Login & Gateway settings :
Default Gateway IP: 192.168.10.1
Default username: admin
Default password: admin
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.10.1
How to factory reset (hard reset) Encore ENHWI-1AN42 :
You can factory reset your Encore ENHWI-1AN42 in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
Encore ENHWI-1AN42 router specifications :
RAM: 16 MiB
Flash: 2 MiB
Custom firmwares: None
WiFi: 300mbps (bgn)
WiFi throughput: n/a
1 x 100mbps port
4 x 100mbps ports
Staying up to date with the latest firmware is a good idea to keep your router even more
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Encore ENHWI-1AN42
Encore stock firmware for the ENHWI-1AN42
Stock firmwares for the ENHWI-1AN42 are available under the download section on the
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.