How to factory reset EnGenius EAP1750H router – Default Login & Password

The EnGenius EAP1750H router has Gigabit WiFi, 1 Gigabit ETH-ports and 0 USB-ports.
It is also known as the EnGenius 802.11ac 3×3 Dual Band Ceiling-Mount Wireless Access Point.

EnGenius EAP1750H default Password , Login & Gateway settings :

If you have performed a reset of your EAP1750H device or not changed the defaults, you
should
be able to access it with the following settings
Default subnet mask: 255.255.255.0

How to factory reset (hard reset) EnGenius EAP1750H :

You can factory reset your EnGenius EAP1750H in the following way(s)
Through the web interface
Open a web browser and go to the address of the router (see default settings below)
Sign in with your username/password, if unchanged check default settings below
Locate Management in the menu and click it
Click on Configure
On the Configure page click on the Reset button, if prompted click Ok
Wait for router to reboot
With the reset button
Have the router plugged in and turned on
Locate the reset button (it’s usually labeled reset or RESET/WPS)
With a sharp object, for example a paperclip, press and hold the reset button for at least 11 seconds
When the POWER led starts blinking release the reset button
Wait for the router to reboot.

EnGenius EAP1750H router specifications :

System specs
CPU: n/a
RAM: 128 MiB
Flash: 16 MiB
Custom firmwares: OpenWrt
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
None
ETH
1 x Gigabit port
USB-ports: 0