How to factory reset EnGenius EMD1 (EnMesh Dot) router – Default Login & Password

The EnGenius EMD1 (EnMesh Dot) router has Gigabit WiFi, 1 Gigabit ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 1300 Mpbs.

EnGenius EMD1 (EnMesh Dot) default Password , Login & Gateway settings :

Default Gateway IP: 192.168.1.1
Default username: admin
Default password: admin
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.1

How to factory reset (hard reset) EnGenius EMD1 (EnMesh Dot) :

You can factory reset your EnGenius EMD1 (EnMesh Dot) in the following way(s)
Through the web interface
Open a web browser and go to the address of the router (see default settings below)
Sign in with your username/password, if unchanged check default settings below
Locate Management in the menu and click it
Click on Configure
On the Configure page click on the Reset button, if prompted click Ok
Wait for router to reboot
With the reset button
Have the router plugged in and turned on
Locate the reset button (it’s usually labeled reset or RESET/WPS)
With a sharp object, for example a paperclip, press and hold the reset button for at least 11 seconds
When the POWER led starts blinking release the reset button
Wait for the router to reboot.

EnGenius EMD1 (EnMesh Dot) router specifications :

System specs
CPU: 710 MHz
RAM: 256 MiB
Flash: 32 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: 1300 Mpbs
WAN
None
ETH
1 x Gigabit port
USB-ports: 0
EnGenius EnMesh review (quick overview)
Here is the quick comparison of how the EnGenius EnMesh compares to
other routers on our site
Average
40/100
Editor
70/100
WiFi
26/100
Hardware
25/100
Current price
$29.95
For a full list of routers and how they compare to the EMD1 (EnMesh Dot), check the
Router Buying Guide which will help you buy the most
price-competitive router.