The EnGenius EnMesh (EMR3000v2) router has Gigabit WiFi, 1 Gigabit ETH-ports and 0 USB-ports.
It is also known as the EnGenius AC1200 Mesh Router.
EnGenius EnMesh (EMR3000v2) default Password , Login & Gateway settings :
Default Gateway IP: 192.168.0.1
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.1
How to factory reset (hard reset) EnGenius EnMesh (EMR3000v2) :
You can factory reset your EnGenius EnMesh (EMR3000v2) in the following way(s)
Through the web interface
Open a web browser and go to the address of the router (see default settings below)
Sign in with your username/password, if unchanged check default settings below
Locate Management in the menu and click it
Click on Configure
On the Configure page click on the Reset button, if prompted click Ok
Wait for router to reboot
With the reset button
Have the router plugged in and turned on
Locate the reset button (it’s usually labeled reset or RESET/WPS)
With a sharp object, for example a paperclip, press and hold the reset button for at least 11 seconds
When the POWER led starts blinking release the reset button
Wait for the router to reboot.
EnGenius EnMesh (EMR3000v2) router specifications :
System specs
CPU: n/a
RAM: 128 MiB
Flash: 32 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
n/a
WiFi throughput: n/a
WAN
1 x Gigabit port
ETH
1 x Gigabit port
USB-ports: 0
EnGenius EnMesh review (quick overview)
Here is the quick comparison of how the EnGenius EnMesh compares to
other routers on our site
Average
36/100
Editor
80/100
WiFi
20/100
Hardware
9/100
Current price
$79.98
For a full list of routers and how they compare to the EnMesh (EMR3000v2), check the
Router Buying Guide which will help you buy the most
price-competitive router.
