How to factory reset Google Wifi (NLS-1304-25) router – Default Login & Password

The Google Wifi (NLS-1304-25) router has Gigabit WiFi, 1 Gigabit ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 1200 Mpbs.
It is also known as the Google Home WiFi System.

Google Wifi (NLS-1304-25) default Password , Login & Gateway settings :

If you have performed a reset of your Wifi (NLS-1304-25) device or not changed the defaults, you
should
be able to access it with the following settings
Default subnet mask: 255.255.255.0

How to factory reset (hard reset) Google Wifi (NLS-1304-25) :

You can factory reset your Google Wifi (NLS-1304-25) in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds

Google Wifi (NLS-1304-25) router specifications :

System specs
CPU: 717 MHz
RAM: 512 MiB
Flash: 4096 MiB + 8 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: 1200 Mpbs
WAN
1 x Gigabit port
ETH
1 x Gigabit port
USB-ports: 0
Wifi (NLS-1304-25) Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Google Wifi (NLS-1304-25)
Google stock firmware for the Wifi (NLS-1304-25)
Stock firmwares for the Wifi (NLS-1304-25) are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.