How to factory reset HooToo HT-ND001 router – Default Login & Password

The HooToo HT-ND001 router has Gigabit WiFi, 4 Gigabit ETH-ports and 0 USB-ports.
It is also known as the HooToo AC1200, 4 Antennas USB 3.0 Port, Dual Band 2.4GHz / 5GHz Wi-Fi Router.

HooToo HT-ND001 default Password , Login & Gateway settings :

Default Gateway IP: 10.10.10.252
Default username: admin
Default password: admin
Default subnet mask: 255.255.255.0
Default DNS server: 10.10.10.252

How to factory reset (hard reset) HooToo HT-ND001 :

You can factory reset your HooToo HT-ND001 in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds

HooToo HT-ND001 router specifications :

System specs
CPU: 880 MHz
RAM: 128 MiB
Flash: 16 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
n/a
WiFi throughput: n/a
WAN
1 x Gigabit port
ETH
4 x Gigabit ports
USB-ports: 0
HT-ND001 Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the HooToo HT-ND001
HooToo stock firmware for the HT-ND001
Stock firmwares for the HT-ND001 are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.