The Linksys EA6300 v1 router has Gigabit WiFi, 4 Gigabit ETH-ports and 0 USB-ports.
Linksys EA6300 v1 default Password , Login & Gateway settings :
If you have performed a reset of your EA6300 v1 device or not changed the defaults, you
should
be able to access it with the following settings
Default Network name (SSID): LinksysXXXXX
Default subnet mask: 255.255.255.0
How to factory reset (hard reset) Linksys EA6300 v1 :
You can factory reset your Linksys EA6300 v1 in the following way(s)
Through the web interface
Open your browser and navigate to the router interface (see default settings below)
Under the Administration tab you will find a sub-tab called Factory defaults
On the Factory defaults page click the button labeled Restore Factory Defaults
With the reset button
Have your unit powered on
Press and hold the reset button for at least 10 seconds until the power light starts blinking, then release.
When the power light goes solid, unplug the power to the router for 10 seconds
Plug the power back in and start the router
When the power light goes solid again the router is ready to use.
Linksys EA6300 v1 router specifications :
System specs
CPU: n/a
RAM: 128 MiB
Flash: 128 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
1 x Gigabit port
ETH
4 x Gigabit ports
USB-ports: 0
Linksys EA6300 review (quick overview)
Here is the quick comparison of how the Linksys EA6300 compares to
other routers on our site
Average
37/100
Editor
72/100
WiFi
20/100
Hardware
21/100
Current price
$15.25
For a full list of routers and how they compare to the EA6300 v1, check the
Router Buying Guide which will help you buy the most
price-competitive router.
