How to factory reset Linksys LAPN300 router – Default Login & Password

The Linksys LAPN300 router has 300mbps WiFi, 1 Gigabit ETH-ports and 0 USB-ports.
It is also known as the Linksys Wireless-N300 Access Point with PoE.
How to factory reset Linksys LAPN300 - Default Login & Password

Linksys LAPN300 default Password , Login & Gateway settings :

If you have performed a reset of your LAPN300 device or not changed the defaults, you
should
be able to access it with the following settings
Default subnet mask: 255.255.255.0

How to factory reset (hard reset) Linksys LAPN300 :

You can factory reset your Linksys LAPN300 in the following way(s)
Through the web interface
Open your browser and navigate to the router interface (see default settings below)
Under the Administration tab you will find a sub-tab called Factory defaults
On the Factory defaults page click the button labeled Restore Factory Defaults
With the reset button
Have your unit powered on
Press and hold the reset button for at least 10 seconds until the power light starts blinking, then release.
When the power light goes solid, unplug the power to the router for 10 seconds
Plug the power back in and start the router
When the power light goes solid again the router is ready to use.

Linksys LAPN300 router specifications :

System specs
CPU: n/a
RAM: 128 MiB
Flash: 8 MiB
Custom firmwares: None
Connectivity
WiFi: 300mbps (bgn)
WiFi bands
2.4GHz
WiFi throughput: n/a
WAN
None
ETH
1 x Gigabit port
USB-ports: 0
Linksys LAPN300 review (quick overview)
Here is the quick comparison of how the Linksys LAPN300 compares to
other routers on our site
Average
30/100
Editor
78/100
WiFi
6/100
Hardware
6/100
Current price
$39.99
For a full list of routers and how they compare to the LAPN300, check the
Router Buying Guide which will help you buy the most
price-competitive router.