The Linksys WET200 router has 54mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports.
Linksys WET200 default Password , Login & Gateway settings :
If you have performed a reset of your WET200 device or not changed the defaults, you
should
be able to access it with the following settings
Default subnet mask: 255.255.255.0
How to factory reset (hard reset) Linksys WET200 :
You can factory reset your Linksys WET200 in the following way(s)
Through the web interface
Open your browser and navigate to the router interface (see default settings below)
Under the Administration tab you will find a sub-tab called Factory defaults
On the Factory defaults page click the button labeled Restore Factory Defaults
With the reset button
Have your unit powered on
Press and hold the reset button for at least 10 seconds until the power light starts blinking, then release.
When the power light goes solid, unplug the power to the router for 10 seconds
Plug the power back in and start the router
When the power light goes solid again the router is ready to use.
Linksys WET200 router specifications :
System specs
CPU: n/a
RAM: n/a
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: 54mbps (bg)
WiFi bands
2.4GHz
WiFi throughput: n/a
WAN
None
ETH
4 x 100mbps ports
USB-ports: 0
Linksys WET200 review (quick overview)
Here is the quick comparison of how the Linksys WET200 compares to
other routers on our site
Average
23/100
Editor
66/100
WiFi
2/100
Hardware
1/100
Current price
$72.48
For a full list of routers and how they compare to the WET200, check the
Router Buying Guide which will help you buy the most
price-competitive router.
