How to factory reset Linksys X1000 router – Default Login & Password

The Linksys X1000 router has 300mbps WiFi, 3 100mbps ETH-ports and 0 USB-ports.
It is also known as the Linksys N300 Wireless Router with ADSL2+ Modem.
How to factory reset Linksys X1000 - Default Login & Password

Linksys X1000 default Password , Login & Gateway settings :

If you have performed a reset of your X1000 device or not changed the defaults, you
should
be able to access it with the following settings
Default subnet mask: 255.255.255.0

How to factory reset (hard reset) Linksys X1000 :

You can factory reset your Linksys X1000 in the following way(s)
Through the web interface
Open your browser and navigate to the router interface (see default settings below)
Under the Administration tab you will find a sub-tab called Factory defaults
On the Factory defaults page click the button labeled Restore Factory Defaults
With the reset button
Have your unit powered on
Press and hold the reset button for at least 10 seconds until the power light starts blinking, then release.
When the power light goes solid, unplug the power to the router for 10 seconds
Plug the power back in and start the router
When the power light goes solid again the router is ready to use.

Linksys X1000 router specifications :

System specs
CPU: 320 MHz
RAM: 64 MiB
Flash: 8 MiB
Custom firmwares: None
Connectivity
WiFi: 300mbps (bgn)
WiFi bands
2.4GHz
WiFi throughput: n/a
WAN
1 x 100mbps port
ETH
3 x 100mbps ports
USB-ports: 0