The Motorola MG7550 router has Gigabit WiFi, 4 Gigabit ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 1900 Mpbs.
It is also known as the Motorola 16×4 Cable Modem plus AC1600 Dual Band Wi-Fi.
Motorola MG7550 default Password , Login & Gateway settings :
Default Gateway IP: 192.168.0.1
Default username: admin
Default password: motorola
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.1
How to factory reset (hard reset) Motorola MG7550 :
You can factory reset your Motorola MG7550 in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
Motorola MG7550 router specifications :
System specs
CPU: n/a
RAM: 256 MiB
Flash: n/a
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: 1900 Mpbs
WAN
None
ETH
4 x Gigabit ports
USB-ports: 0
MG7550 Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Motorola MG7550
Motorola stock firmware for the MG7550
Stock firmwares for the MG7550 are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.
