The Western Digital My Net N900 Central (1TB) router has 300mbps WiFi, 4 Gigabit ETH-ports and 0 USB-ports.
My Net N900 Central (1TB) default Password , Login & Gateway settings :
Default Gateway IP: 192.168.1.1
Western Digital login instructions
Default username: admin
Western Digital router default password list
Default password: password
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.1
How to factory reset (hard reset) My Net N900 Central (1TB) :
You can factory reset your Western Digital My Net N900 Central (1TB) in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds
My Net N900 Central (1TB) router specifications :
CPU: 600 MHz
RAM: 256 MiB
Flash: 16 MiB
Custom firmwares: None
WiFi: 300mbps (abgn)
2.4GHz & 5GHz
WiFi throughput: n/a
1 x Gigabit port
4 x Gigabit ports
My Net N900 Central (1TB) Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Western Digital My Net N900 Central (1TB)
Western Digital stock firmware for the My Net N900 Central (1TB)
Stock firmwares for the My Net N900 Central (1TB) are available under the download section on the
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.