How to factory reset NAG SNR-CPE-W4N (rev.M) router – Default Login & Password

The NAG SNR-CPE-W4N (rev.M) router has 300mbps WiFi, 4 100mbps ETH-ports and 0 USB-ports.
How to factory reset NAG SNR-CPE-W4N (rev.M) - Default Login & Password

NAG SNR-CPE-W4N (rev.M) default Password , Login & Gateway settings :

Default Gateway IP: 192.168.1.1
Default username: Admin
Default password: Admin
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.1

How to factory reset (hard reset) NAG SNR-CPE-W4N (rev.M) :

You can factory reset your NAG SNR-CPE-W4N (rev.M) in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds

NAG SNR-CPE-W4N (rev.M) router specifications :

System specs
CPU: 580 MHz
RAM: 64 MiB
Flash: 8 MiB
Custom firmwares: None
Connectivity
WiFi: 300mbps (bgn)
WiFi bands
n/a
WiFi throughput: n/a
WAN
1 x 100mbps port
ETH
4 x 100mbps ports
USB-ports: 0