How to factory reset Netgear C3000v2 router – Default Login & Password

The Netgear C3000v2 router has 300mbps WiFi, 2 Gigabit ETH-ports and 0 USB-ports.
It is also known as the Netgear N300 WiFi Cable Modem Router.

Netgear C3000v2 default Password , Login & Gateway settings :

Default Gateway IP: 192.168.0.1
Netgear login instructions
Default username: admin
Netgear router default password list
Default password: password
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.0.1

How to factory reset (hard reset) Netgear C3000v2 :

You can factory reset your Netgear C3000v2 in the following way(s)
With the reset button
Have the router powered on (if just booted wait around one minute for it to load)
With a sharp pen or paper clip, press down the Restore Factory Settings button and hold it for about 7 seconds
When the power light starts to blink you can release the reset button and wait for the router to start up
The power light will be solid (not blinking) once the router is started.

How to login to the Netgear C3000v2 :

Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
http://192.168.0.1
You should be prompted with a login dialogue.
Enter the username: admin
and the password password
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.

Netgear C3000v2 router specifications :

System specs
CPU: n/a
RAM: 128 MiB
Flash: 128 MiB + 1 MiB
Custom firmwares: None
Connectivity
WiFi: 300mbps (bgn)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
None
ETH
2 x Gigabit ports
USB-ports: 0
Netgear C3000 review (quick overview)
Here is the quick comparison of how the Netgear C3000 compares to
other routers on our site
Average
34/100
Editor
76/100
WiFi
6/100
Hardware
21/100
Current price
$32.99
For a full list of routers and how they compare to the C3000v2, check the
Router Buying Guide which will help you buy the most
price-competitive router.