The Netgear C6300 router has Gigabit WiFi, 4 N/A ETH-ports and 0 USB-ports.
It is also known as the Netgear AC1750 WiFi Cable Modem Router.
The C6300 is featured in our
Best Low-end routers: buying guide
Netgear C6300 default Password , Login & Gateway settings :
If you have performed a reset of your C6300 device or not changed the defaults, you
should
be able to access it with the following settings
Default username: admin
Netgear router default password list
Default password: password
Default subnet mask: 255.255.255.0
How to factory reset (hard reset) Netgear C6300 :
You can factory reset your Netgear C6300 in the following way(s)
With the reset button
Have the router powered on (if just booted wait around one minute for it to load)
With a sharp pen or paper clip, press down the Restore Factory Settings button and hold it for about 7 seconds
When the power light starts to blink you can release the reset button and wait for the router to start up
The power light will be solid (not blinking) once the router is started.
Netgear C6300 router specifications :
System specs
CPU: 600 MHz
RAM: 256 MiB
Flash: 256 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
None
ETH
4 x N/A ports
USB-ports: 0
Netgear C6300 review (quick overview)
Here is the quick comparison of how the Netgear C6300 compares to
other routers on our site
Average
50/100
Editor
78/100
WiFi
20/100
Hardware
52/100
Current price
$70.00
For a full list of routers and how they compare to the C6300, check the
Router Buying Guide which will help you buy the most
price-competitive router.
C6300 Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Netgear C6300
Netgear stock firmware for the C6300
Stock firmwares for the C6300 are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.
