How to factory reset (Netgear) N150R router – Default Login & Password

The On Networks (Netgear) N150R router has 300mbps WiFi, 2 100mbps ETH-ports and 0 USB-ports.
It is also known as the On Networks N150 WiFi Router.
How to factory reset (Netgear) N150R - Default Login & Password

(Netgear) N150R default Password , Login & Gateway settings :

Default Gateway IP:
On Networks login instructions
Default username: admin
Default password: admin
Default subnet mask:
Default DNS server:

How to factory reset (hard reset) (Netgear) N150R :

You can factory reset your On Networks (Netgear) N150R in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds

(Netgear) N150R router specifications :

System specs
CPU: 400 MHz
RAM: 32 MiB
Flash: 4 MiB
Custom firmwares: OpenWrt
WiFi: 300mbps (bgn)
WiFi bands
WiFi throughput: n/a
1 x 100mbps port
2 x 100mbps ports
USB-ports: 0
On Networks N150R review (quick overview)
Here is the quick comparison of how the On Networks N150R compares to
other routers on our site
Current price
For a full list of routers and how they compare to the (Netgear) N150R, check the
Router Buying Guide which will help you buy the most
price-competitive router.
(Netgear) N150R Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the On Networks (Netgear) N150R
Flashing OpenWrt on the On Networks (Netgear) N150R
The On Networks (Netgear) N150R is supported by OpenWrt according to their Table of
Hardware. So
flashing OpenWrt onto it should be quite straigthforward.
We couldn’t find any specific instructions for flashin OpenWrt on the On Networks
(Netgear) N150R, but since it’s listed in their Table of Hardware as supported, you can
over to the
OpenWrt install instructions and read on there.
Note: Flashing custom firmwares is always on you’re on own risk. Make sure to
read OpenWrt’s wikis to understand the risks and how to proceed if something goes
On Networks stock firmware for the (Netgear) N150R
Stock firmwares for the (Netgear) N150R are available under the download section on the
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.