The Netgear Orbi Wall Plug Satellite (RBW30) Gen2 router has Gigabit WiFi, N/A ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 2200 Mpbs.
Netgear Orbi Wall Plug Satellite (RBW30) Gen2 default Password , Login & Gateway settings :
Default Gateway IP: 192.168.1.1
Netgear login instructions
Default username: admin
Netgear router default password list
Default password: password
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.1
How to factory reset (hard reset) Netgear Orbi Wall Plug Satellite (RBW30) Gen2 :
You can factory reset your Netgear Orbi Wall Plug Satellite (RBW30) Gen2 in the following way(s)
With the reset button
Have the router powered on (if just booted wait around one minute for it to load)
With a sharp pen or paper clip, press down the Restore Factory Settings button and hold it for about 7 seconds
When the power light starts to blink you can release the reset button and wait for the router to start up
The power light will be solid (not blinking) once the router is started.
How to login to the Netgear Orbi Wall Plug Satellite (RBW30) Gen2 :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
http://192.168.1.1
You should be prompted with a login dialogue.
Enter the username: admin
and the password password
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.
Netgear Orbi Wall Plug Satellite (RBW30) Gen2 router specifications :
System specs
CPU: 710 MHz
RAM: 256 MiB
Flash: 256 MiB
Custom firmwares: None
Connectivity
WiFi: Gigabit (abgn+ac)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: 2200 Mpbs
WAN
None
ETH
None
USB-ports: 0
Orbi Wall Plug Satellite (RBW30) Gen2 Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Netgear Orbi Wall Plug Satellite (RBW30) Gen2
Netgear stock firmware for the Orbi Wall Plug Satellite (RBW30) Gen2
Stock firmwares for the Orbi Wall Plug Satellite (RBW30) Gen2 are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.
