The Netgear ProSecure UTM50 router has No WiFi, 6 N/A ETH-ports and 0 USB-ports.
It is also known as the Netgear ProSecure Unified Threat Management (UTM) Appliance.
The ProSecure UTM50 is featured in our
Best Low-end routers: buying guide
Netgear ProSecure UTM50 default Password , Login & Gateway settings :
Default Gateway IP: 192.168.1.1
Netgear login instructions
Default username: admin
Netgear router default password list
Default password: password
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.1
How to factory reset (hard reset) Netgear ProSecure UTM50 :
You can factory reset your Netgear ProSecure UTM50 in the following way(s)
With the reset button
Have the router powered on (if just booted wait around one minute for it to load)
With a sharp pen or paper clip, press down the Restore Factory Settings button and hold it for about 7 seconds
When the power light starts to blink you can release the reset button and wait for the router to start up
The power light will be solid (not blinking) once the router is started.
How to login to the Netgear ProSecure UTM50 :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
http://192.168.1.1
You should be prompted with a login dialogue.
Enter the username: admin
and the password password
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.
Netgear ProSecure UTM50 router specifications :
System specs
CPU: 700 MHz
RAM: 1024 MiB
Flash: 8 MiB + 2048 MiB
Custom firmwares: None
Connectivity
WiFi: No ()
WiFi bands
n/a
WiFi throughput: n/a
WAN
2 x N/A ports
ETH
6 x N/A ports
USB-ports: 0
Netgear ProSecure review (quick overview)
Here is the quick comparison of how the Netgear ProSecure compares to
other routers on our site
Average
47/100
Editor
62/100
WiFi
2/100
Hardware
78/100
Current price
$900.00
For a full list of routers and how they compare to the ProSecure UTM50, check the
Router Buying Guide which will help you buy the most
price-competitive router.
ProSecure UTM50 Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Netgear ProSecure UTM50
Netgear stock firmware for the ProSecure UTM50
Stock firmwares for the ProSecure UTM50 are available under the download section on the
modem’s
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.
