The Netgear ReadyNAS RN102 router has No WiFi, 1 Gigabit ETH-ports and 0 USB-ports.
Netgear ReadyNAS RN102 default Password , Login & Gateway settings :
Default Gateway IP: 192.168.58.21
Netgear login instructions
Default username: admin
Netgear router default password list
Default password: password
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.58.21
How to factory reset (hard reset) Netgear ReadyNAS RN102 :
You can factory reset your Netgear ReadyNAS RN102 in the following way(s)
With the reset button
Have the router powered on (if just booted wait around one minute for it to load)
With a sharp pen or paper clip, press down the Restore Factory Settings button and hold it for about 7 seconds
When the power light starts to blink you can release the reset button and wait for the router to start up
The power light will be solid (not blinking) once the router is started.
How to login to the Netgear ReadyNAS RN102 :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
You should be prompted with a login dialogue.
Enter the username: admin
and the password password
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.
Netgear ReadyNAS RN102 router specifications :
CPU: 1.2 GHz
RAM: 512 MiB
Flash: 128 MiB
Custom firmwares: None
WiFi: No ()
WiFi throughput: n/a
1 x Gigabit port
Netgear ReadyNAS review (quick overview)
Here is the quick comparison of how the Netgear ReadyNAS compares to
other routers on our site
For a full list of routers and how they compare to the ReadyNAS RN102, check the
Router Buying Guide which will help you buy the most