The Netgear RT314 router has No WiFi, 1 10mbps ETH-ports and 0 USB-ports.
Netgear RT314 default Password , Login & Gateway settings :
If you have performed a reset of your RT314 device or not changed the defaults, you
be able to access it with the following settings
Default subnet mask: 255.255.255.0
How to factory reset (hard reset) Netgear RT314 :
You can factory reset your Netgear RT314 in the following way(s)
With the reset button
Have the router powered on (if just booted wait around one minute for it to load)
With a sharp pen or paper clip, press down the Restore Factory Settings button and hold it for about 7 seconds
When the power light starts to blink you can release the reset button and wait for the router to start up
The power light will be solid (not blinking) once the router is started.
Netgear RT314 router specifications :
Custom firmwares: None
WiFi: No ()
WiFi throughput: n/a
1 x 10mbps port
1 x 10mbps port
Netgear RT314 review (quick overview)
Here is the quick comparison of how the Netgear RT314 compares to
other routers on our site
For a full list of routers and how they compare to the RT314, check the
Router Buying Guide which will help you buy the most
Staying up to date with the latest firmware is a good idea to keep your router even more
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Netgear RT314
Netgear stock firmware for the RT314
Stock firmwares for the RT314 are available under the download section on the
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.