The Netgear XR700 router has Gigabit WiFi, 6 N/A ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 7200 Mpbs.
It is also known as the Netgear Nighthawk Pro Gaming Router.
Netgear XR700 default Password , Login & Gateway settings :
If you have performed a reset of your XR700 device or not changed the defaults, you
be able to access it with the following settings
Default Network name (SSID): NETGEARXX
Default username: admin
Netgear router default password list
Default password: password
Default subnet mask: 255.255.255.0
How to factory reset (hard reset) Netgear XR700 :
You can factory reset your Netgear XR700 in the following way(s)
With the reset button
Have the router powered on (if just booted wait around one minute for it to load)
With a sharp pen or paper clip, press down the Restore Factory Settings button and hold it for about 7 seconds
When the power light starts to blink you can release the reset button and wait for the router to start up
The power light will be solid (not blinking) once the router is started.
Netgear XR700 router specifications :
CPU: 1.7 GHz
RAM: 1024 MiB
Flash: 512 MiB
Custom firmwares: None
WiFi: Gigabit (abgn+ac+ad)
2.4GHz & 5GHz
WiFi throughput: 7200 Mpbs
1 x N/A port
6 x N/A ports
Staying up to date with the latest firmware is a good idea to keep your router even more
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Netgear XR700
Netgear stock firmware for the XR700
Stock firmwares for the XR700 are available under the download section on the
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.