How to factory reset PePLink Pepwave Surf On-The-Go (SUS-AGN1) router – Default Login & Password

The PePLink Pepwave Surf On-The-Go (SUS-AGN1) router has 300mbps WiFi, 1 100mbps ETH-ports and 0 USB-ports.
How to factory reset PePLink Pepwave Surf On-The-Go (SUS-AGN1) - Default Login & Password

PePLink Pepwave Surf On-The-Go (SUS-AGN1) default Password , Login & Gateway settings :

Default Gateway IP: 192.168.20.1
Default username: root
Default password: admin
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.20.1

How to factory reset (hard reset) PePLink Pepwave Surf On-The-Go (SUS-AGN1) :

You can factory reset your PePLink Pepwave Surf On-The-Go (SUS-AGN1) in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds

PePLink Pepwave Surf On-The-Go (SUS-AGN1) router specifications :

System specs
CPU: n/a
RAM: 64 MiB
Flash: 16 MiB
Custom firmwares: None
Connectivity
WiFi: 300mbps (bgn)
WiFi bands
2.4GHz & 5GHz
WiFi throughput: n/a
WAN
None
ETH
1 x 100mbps port
USB-ports: 0
PePLink Pepwave Surf On-The-Go review (quick overview)
Here is the quick comparison of how the PePLink Pepwave Surf On-The-Go compares to
other routers on our site
Average
28/100
Editor
74/100
WiFi
6/100
Hardware
5/100
Current price
$329.99
For a full list of routers and how they compare to the Pepwave Surf On-The-Go (SUS-AGN1), check the
Router Buying Guide which will help you buy the most
price-competitive router.