How to factory reset Philips Hue Bridge 2.0 router – Default Login & Password

The Philips Hue Bridge 2.0 router has 300mbps WiFi, 1 100mbps ETH-ports and 0 USB-ports.

Philips Hue Bridge 2.0 default Password , Login & Gateway settings :

If you have performed a reset of your Hue Bridge 2.0 device or not changed the defaults, you
should
be able to access it with the following settings
Default subnet mask: 255.255.255.0

How to factory reset (hard reset) Philips Hue Bridge 2.0 :

You can factory reset your Philips Hue Bridge 2.0 in the following way(s)
1. When the router is on, press the button reset and hold for 30 seconds.
2. While holding down the button reset, turn off the power of the router and hold down the button reset for 30 seconds
3. While holding down the button reset, turn on the power to the unit again and hold for another 30 seconds

Philips Hue Bridge 2.0 router specifications :

System specs
CPU: 650 MHz
RAM: 64 MiB
Flash: 128 MiB
Custom firmwares: OpenWrt
Connectivity
WiFi: 300mbps (bgn)
WiFi bands
2.4GHz
WiFi throughput: n/a
WAN
None
ETH
1 x 100mbps port
USB-ports: 0
Philips Zigbee IP Bridge review (quick overview)
Here is the quick comparison of how the Philips Zigbee IP Bridge compares to
other routers on our site
Average
38/100
Editor
80/100
WiFi
6/100
Hardware
30/100
Current price
$35.00
For a full list of routers and how they compare to the Hue Bridge 2.0, check the
Router Buying Guide which will help you buy the most
price-competitive router.